Wireless Functions
- Q1
- Can I select a particular image in camera memory and send it to a smartphone?
(Send Selected Image) - A1
-
Yes.
You can select one more snapshot and/or movie*1 file in camera memory and send it to a smartphone.*2*3 You can select up to 100 snapshot and movies, totaling no more than 500MB for a single send.*4*5 After sending a snapshot to a smartphone, you can then upload it to a social networking service.*1 Some smartphone models may not be able to play back movie files. *2 Make sure that the battery is charged sufficiently. *3 Make sure there is enough free space in the destination memory. *4 After sending, perform the required operation on the destination device to ensure that the send was successful. *5 Before deleting the image on the source device, check to make sure that it is stored properly on the destination device. Procedure 1. On the camera, press [Wireless] button. 2. On the camera, use the <up>, <down>, <left>, and <right> keys to select “Send to phone” and then press [SET]. 3. On the camera, use the <up> and <down> keys to select “Send Selected Image” and then press [SET]. 4. On the camera, move the red selection boundary to the image you want to send to the smartphone and then press [SET]. Selecting an image causes a check mark to appear in its check box. 5. After selecting all of the images you want to send to the smartphone, press [MENU]. • Except for protected images, images that are sent will be marked by a sent icon. 6. On your smartphone, start up the EXILIM Connect app. This will establish a connection between your camera and the smartphone, and send the selected images to the smartphone. • If the message "Connect your phone to the access point below." remains on the camera's monitor screen, change the smartphone's Wi-Fi settings so your camera is selected for connection. 7. After image send is complete, back to TOP Panel. On the smartphoen, tapping "Receive icon" while images are being received displays the images. You can perform the operationes below after image receive is complete.
Share Album in Scene app: You can use the Scene app on the smartphone to send images from the camera to a smartphone. Preview photo in Scene app: You can use the Scene app on the smartphone to view the images received from the camera. Send to SNS: Displays a screen for sending images to a social networking site. To TOP Panel: Exits this operation and returns to the TOP screen. * The Scene app is an image management app by ripplex inc. It makes it possible to display images at high speed and to share albums with friends. • For information about the Scene app, contact ripplex inc. • To use the scene recall function, you need to have the Scene app installed on your phone/terminal. If your phone/terminal does not have the Scene app installed, it will display a message prompting you to do so. • The Share Album functions of both iPhone and Android to not support movies. - On an iPhone, movies sent from EXILIM Connect are placed in Cameral Roll, so they are included among the Scene app photos. NOTE • To use this function, you need to install the EXILIM Connect app on your smartphone. • You can specify the size of the image sent to the smartphone using "Resize before send". 3M Images are converted to 3M size before being sent.
• If an original image is 3M size or smaller, it is sent without resizing.Original (Off) Images are sent in the pixels size they were originally recorded. • You can use the smartphone apps below to view snapshots after sending them.
- iPhone: Camera Roll
- Android terminal: Gallery or another photo browser app• Simultaneous send to multiple smartphones is not supported. • Simultaneous send to the same smartphone by multiple cameras is not supported.