Other Special-purpose Recording Features
- Q3
- Can Handsfree (Motion Shutter) settings or the location of the on-screen motion detection icon?
- A3
Perform the procedures below.
To configure Handsfree Mode settings
1. In the REC mode, display "MENU". 2. Press the <left> key, use the <up> and <down> keys to select the "REC MENU" tab, and then press the <right> key. 3. Use the <up> and <down> keys to select "Handsfree" and then press [SET]. 4. Configure Handsfree settings as desired. Setting Description Motion Shutter Specifies operation for entering the Handsfree Mode.
Always:
The camera always remains in the Handsfree Mode, regardless of whether or not the monitor screen is tilted.
180°only:Camera enters the Handsfree Mode when the monitor screen is tilted upwards 180 degrees.
Off:
Handsfree Mode disabled.Timer Specifies the timer it takes from when the camera detects movement until shooting is performed.Settings: 0.5 seconds, 1 second, 2 seconds, 10 seconds
To reposition the motion detection icon
1. In the REC mode, display "MENU".
2. Press the <left> key, use the <up> and <down> keys to select the "REC MENU" tab, and then press the <right> key.
3. Use the <up> and <down> keys to select "Motion Position" and then press [SET].
4. Press [MODE].
• This will select one of the two icons on the display. Pressing [MODE] toggles the selection between the start self-timer icon and the preview icon.
5. Use the <up>, <down>, <left>, and <right> keys to reposition the currently selected icon.
6. Press [MODE] to select the other icon if you want, and reposition it using the same operation as step 5.
7. When the icons are located where you want, press [SET].