Photo Loader 2.3 Software Download

Upgrading if you are currently running Photo Loader version 1.0 to 1.0.4

IMPORTANT!
Never install Photo Loader 2.39 on a computer that currently has a Photo Loader version from 1.0 to 1.0.4. Always uninstall the current version of Photo Loader first and then install Photo Loader 2.39. If you incorrectly perform the procedure, library management data and calendar formats used by the older version may not be passed on to the new version, which can cause the loss of image files.
Do not install Photo Loader to or store libraries on a removable disk drive, CD-R drive, or other removable medium. Doing so can result in abnormal operation of Photo Loader.
1. If you have libraries stored in different locations under your current Photo Loader version (1.0 to 1.0.4), start up your current Photo Loader version and use "Move" to move all of the libraries to the ImageLib folder. (Figure 1),(Figure 2)
To find out if you have libraries stored in multiple locations, check "Location" under the item "Library list" of the Photo Loader "Move" command.
The "Move" operation is not necessary if you want to use the default library storage location or if all libraries are already stored in the current location.
Use only the Photo Loader "Move" operation to move libraries.
Figure 1
(Figure 1)
(Figure 2)
2. Copy the current Photo Loader file named "Ploader.qvs" from the "Ploader" folder (Figure 3) to your computer's desktop. If you installed your current Photo Loader version using default settings, the "Ploader.qvs" file will be located at C:\Program Files\Casio\Ploader.
Figure 3
(Figure 3)
3. Quit the current Photo Loader version browser program. If you can see the browser program icon in the task tray in the lower right corner of your computer screen (Figure 4), right-click the icon and then select "Exit" from the shortcut menu that appears.
Figure 4
(Figure 4)
4. Perform the following steps to uninstall your existing Photo Loader version.
4-1) On the "Start" menu, select "Control Panel" (Figure 5).
Figure 5
(Figure 5)
4-2) Select "Add or Remove Program" (Figure 6).
Figure 6
(Figure 6)
4-3) In the "Currently installed programs" list, select "Photo Loader 1.0E", and then click "Change/Remove" (Figure 7).
Figure 7
(Figure 7)
4-4) In response to the "Confirm File Deletion" dialog box that appears (Figure 8), select "Yes". This will start the uninstall operation.
Figure 8
(Figure 8)
4-5) In response to the "Remove Shared Files?" prompt, select "Yes to All" or "No to All".
* If you plan to install the downloaded upgrade immediately after finishing the uninstall operation, select "Yes to All" here..
4-6) In response to the "Remove Program From Your Computer" dialog box that appears (Figure 9), select "OK".
Figure 9
(Figure 9)
5. Perform the following steps to install Photo Loader 2.39, which you downloaded from the CASIO Website.
5-1) Double-click the compressed file that you downloaded (pl239e.exe), which will extract it. On the dialog box that appears, specify the folder to which you want to extract the files, and then click "OK".
* Extraction will create a folder named "pl239e" at the location you specify (Figure 10), and then will extract the files included under "File List" into the folder.
Figure 10
(Figure 10)
5-2) Open the extracted "pl239e" folder and then double click "Setup.exe" (Figure 11) to start the installer.
Figure 11
(Figure 11)
5-3) On the "Photo Loader 2.3E Setup" dialog box that appears (Figure 12), select "Next".
Figure 12
(Figure 12)
5-4) Carefully read the contents of the "License Agreement" dialog box that appears (Figure 13), and then select "Yes".
Figure 13
(Figure 13)
5-5) Check the "Destination Folder" item of the "Choose Destination Location" dialog box that appears (Figure 14), and then select "Next".
* If you want to change the destination folder, select "Browse" and to display the "Choose Folder" dialog box.
Figure 14
(Figure 14)
5-6) Clicking "Next" in the previous step starts Photo Loader installation. On the "Install Shield Wizard Complete" dialog box that appears after installation is complete (Figure 15), select "Finish".
Figure 15
(Figure 15)
5-7) Restart your computer to complete installation.
6. Start up the new Photo Loader version (2.39E) . When the "Welcome to Photo Loader 2.39" dialog box (Figure 16) appears, click "OK".
Figure 16
(Figure 16)
7. This will display the Photo Loader Ver2.39E menu. If you want to move the Image Library folder, perform the following steps.
7-1) In Photo Loader 2.39E, select "Preferences", display the "General" tab, and then select "Browse" under "Folder to save library".(Figure 17)
7-2) Select the default library storage location that was specified when you installed Photo Loader.
* The default library storage location at this time is located at C:\Program Files\CASIO\Photo Loader.
7-3) Click the "Select folder" button.
Figure 17
(Figure 17)
8. Quit the newly installed Photo Loader 2.39E.
9. Use "My Computer" or Explorer to move all of the files from the ImageLib folder of your previous Photo Loader version to the Image Library folder (Figure 18) of the new version (2.39E).
* If you installed the Photo Loader versions using default settings, the "Image Library" folder will be located at C:\Program Files\Casio\Photo Loader, while the "ImageLib" folder will be located at C:\Program Files\Casio\Ploader.
(Figure 18)
10. Copy the previous version's "Ploader.qvs" file that you copied to the desktop to the "Image Library folder (Figure 19) of the new Photo Loader version (2.39E).
(Figure 19)
11. Start up Photo Loader 2.39E . Select "Edit ", click "Select all ", and then click "Rebuild " (Figure 20).
Figure 20
(Figure 20)
12. Start up Photo Loader 2.39E.
By performing the above procedure, you will be able to continue using library management information and calendar formats from your previous Photo Loader version with Photo Loader 2.39E. After confirming that you experience no problem using your existing library management information and calendar formats with Photo Loader2.39E, delete the "Ploader" folder of your previous Photo Loader version. If you installed your current Photo Loader version using default settings, the "Ploader" folder will be located at C:\Program Files\Casio.

Top of Page